- Anti-static footwear
- Water resistant upper to prevent water penetration
- 100% metal free
- 200 joules resistant toe-cap
- Puncture resistant sole
- Shock absorption in the heel region
- Hydrocarbons resistant
- Men’s width
- Orthopaedic made to measure footbed, complying with european norms DGUV112-191
Collection: Classic Plus
Upper: Water-Resistant Waxy Leather
Lining: SmellStop Antiodor and Antibacterial*
Midsole: Fresh’n Flex
Sole: Antifatigue AirTech + Tpu-Skin Technology 4x4
Size range: 39 - 50
UNI EN ISO 20345:2012 S3 (CI SRC)
Uneven surfaces, grounds, stones, gravel and mud: 4×4 is ready for everything
There are special conditions that put a strain on the endurance of the safety shoes and on the well-being of the foot, exposing them to stresses that could cause serious damage to the health of the worker.
The solution comes from Base Protection with the new technology that combines solidity and lightness to offer comfort, strength and resistance to stress.
The secret is a sole made with a low density compound that reduces the weight but has the same performance as that of a double density sole, with high resistance to bending, abrasion and tearing.
LIGHTNESS AND FLEXIBILITY
Airtech + Tpu-Skin is an exclusive technology, patented by Base Protection, to reduce the outsole’s hard and compact thickness to 0.2 mm.
The result is an increased elasticity of the safety shoe and a cushioning and anti-fatigue effect.
Reducing the outsole allows to obtain more space for AirTech, the soft and elastic layer that cushions and promotes the best distribution of body weight.
The greater elasticity and less pressure on the metatarsus make you feel like walking on a soft pillow.
AN EVEN GREATER COMFORT WITH TPU-SKIN ULTRAFLEX
The anti-fatigue effect of Base Protection shoes is even increased with Tpu-Skin Ultraflex, the technology that guarantees high flexibility to further reduce foot stress.
LIGHT METAL-FREE TOE-CAP
Lightness is a fundamental requirement for those who wear safety shoes for 8 hours a day. Often, however, safety shoes, even respecting the safety standards set by the regulations, are heavy and damp, causing discomfort to the foot. For this reason, Base Protection has designed the non-metallic SlimCap toe cap.
LIGHTNESS AND COMFORT, WITHOUT PENALIZING SAFETY AND DESIGN.
The weight of normal safety shoes can be up to 750 grams. Thanks to SlimCap and other technologies, Base Protection footwear can weigh up to 480 grams, while maintaining the safety parameters unchanged.
With SlimCap, the external dimensions of the Base Protection shoes are significantly reduced, with a 35% decrease in thickness compared to market standards. However, this reduction does not affect the performance of the safety shoes, which are guaranteed from -40 ° to 60 °.
The non-metallic SlimCap toe cap, only 6.5 mm thick, is not only smaller and lighter than those normally used but is also elastic, non-magnetic and heat-insulating.
Lightness and comfort are also guaranteed by the protective band, which is perfectly adherent and shaped to the toe cap, avoiding the risk of detachments that causes pressure on the foot, and consequent pain to the toes.
One of the most important technologies applied to Base Protection shoes is SmellStop, a particular anti-odor lining that prevents the proliferation of microorganisms responsible for bad odors and fungi.
With SmellStop, Base Protection has made its safety shoes anti-odor and antibacterial*, ensuring maximum foot protection.
Thanks to the SmellStop permanent antibacterial* treatment, the risks of infections and fungi caused by sweat are drastically reduced, since the innovative lining recreates a healthy environment inside the shoe and a constant dry microclimate, ideal conditions to give well-being to the foot.
AN ANTI-ODOR TREATMENT FOR THE ENTIRE LIFESPAN OF THE SHOE
The advantage of Base Protection’s SmellStop technology lies in the fact that the antibacterial* treatment does not have an expiration date but is effective for the entire lifespan of the safety shoes, carrying out a constant action.
COMFORT AND FIT
Thanks to SmellStop, the Base Protection anti-odor safety shoes are comfortable and light even when worn for many hours a day.
The SmellStop lining keeps the foot dry, gently wrapping it with maximum wearability. In addition to SmellStop, what makes Base Protection safety shoes breathable and anti-odor is the Dry’n Air technology, based on an air ducts and holes system in the sole, which allows the moisture generated by sweat to be pushed out of the shoe, maintaining a constantly dry and cool internal microclimate.
*Treatment made with biocide Zinc pyrithione (CAS-No.13463-41-7) product type PT 09 who counteracts the deposit of microorganisms on the surface of materials.
Base Catalogue and Size Chart
Updated design and innovative technologies: Classic Plus is the range that improves the footwear performance for the well-being of your feet.
Comfort is what has inspired Base Protection since its first day of activity. The company produces safety footwear, combining technology and functional requirements, to respond to professional and more demanding clients.