The FB30 Over-coat is constructed using a Nomex® / Lenzing® FR Viscose outer shell fabric.

Features include a quick release front zip, lower front pockets with press stud for holding gloves and knitted cuffs with thumb loops to hold sleeves in place

Protection against radiant, convective and contact heat.

Waterproof and breathable with taped seams to prevent water penetration.

Color: Navy S-3XL

EN 469 (Level 2)

Designed to protect the lower body, the Solar FB31 Over-trouser is constructed using a Nomex® / Lenzing® FR Viscose fabric.

The design offers high freedom of movement.

Features include a low-cut crotch seam, non detachable shoulder braces, side elastic and bellow front fly.

Protection against radiant, convective and contact heat.

Waterproof and breathable with taped seams to prevent water penetration.

Color: Navy S-3XL

EN 469 (Level 2)

 The FB40 Over-coat is worn as part of a two piece suit and combined with 4 layers of fabrics including a moisture barrier and thermal barrier. Knitted cuffs made from Nomex® with thumb-holes hold the sleeve end in place when gloves are worn. The quick release zip aids a speedy removal if required.

EN 469 , LEVEL 2

Features on the Over-trouser include cargo pockets on the side legs, tapered leg end with a zip and gusset to allow for expansion if required when worn over boots. Side opening on the knee pockets allows for removal or addition of kneepads.

EN 469 , LEVEL 2

Ideally suited to offshore industries this top of the range coverall comes in inch sizes for the perfect fit.

Certified to a multitude of international standards the Aberdeen coverall offers top protection in a range of hazardous environments.

Protection against radiant, convective and contact heat.

Class 2 welding protection.

Color: Navy, Orange, Red 36”-54”

EN ISO 11612 (A1+A2, B1, C1, E2, F1)
EN ISO 11611 Class 2 (A1+A2)
EN 1149 -5
IEC 61482-2 IEC 61482-1-1 (Elim 8.6 CAL/CM²)
IEC 61482-2 IEC 61482-1-2 APC 1
ASTM F1959/F1959M-12 (ATPV=13.6 Cal/CM2 (HAF=82%))

This super lightweight coverall offers outstanding flame resistant protection.

The Araflame fabric is soft and breathable but provides excellent tear and tensile strength.

Ideal for a variety of industries including oil and gas, petrochemical and many more.

Coverall features include triple stitching throughout, secure pockets and waist elastication for ease of movement.

Inherent flame resistant qualities will not diminish with washing.

Protection against radiant, convective and contact heat.

Color: Navy, Orange, 36” – 54”

EN ISO 11612 (A1+A2, B1, C1, F1)
EN 1149 -5
IEC 61482-2 IEC 61482-1-1 (ELIM 3.8CAL/CM² )
ASTM F1959/F1959M-12 (ATPV 5.9 CAL/CM2 (HAF 63.1%))

The EN ISO 20471 orange colour twinned with the silver flame resistant reflective tape on the shoulders, torso, arms and legs offer superior enhanced visibility.

Inherent flame resistant qualities will not diminish with washing.

Protection against radiant, convective and contact heat.

Color: Orange S-5XL

EN ISO 11612 (A1, B1, C1, F1)
EN ISO 11611 Class 1 (A1)
EN 1149 -5
EN ISO 20471 Class 3
RIS 3279 TOM Issue 2 (Orange Only)

This super lightweight coverall offers outstanding flame resistant protection.

The Araflame fabric is soft and breathable but provides excellent tear and tensile strength.

Ideal for a variety of industries including oil and gas, petrochemical and many more.

The coverall's features include triple stitching throughout, secure pockets and waist elastication for ease of movement.

Inherent flame resistant qualities will not diminish with washing.

Protection against radiant, convective and contact heat.

CE-CAT III.

Color: Khaki, Navy, Orange, Red, Royal Blue

EN ISO 11612 (A1+A2, B1, C1, F1)
EN 1149 -5
IEC 61482-2 IEC 61482-1-1 (ELIM 3.8CAL/CM² )
ASTM F1959/F1959M-12 (ATPV 5.9 CAL/CM2 (HAF 63.1%))

Created with flame resistant properties, the Arc Grip Glove provides a high level of protection against Arc Flash burns and cuts.

The 13-gauge knitted liner is manufactured with a unique flame-resistant aramid yarn which provides increased dexterity and hand movement.

The flame-resistant neoprene coated palm allows for excellent grip.

Arc Flash level 2 (ATPV 9.5cal/cm2) and Anti-Static to EN1149.

Color: Green/Black M/8-XXL/11

ANSI/ISEA 105 - 2016 CUT Level (A4)
ASTM F2675-13 (2)
ANSI/ISEA 105 - 2016 CUT Level (A4)
EN 420
EN 388:2016 - (4.X.4.2.D.)
EN 407 (X.1.X.X.X.X.)
EN 1149

This lightweight shirt offers guaranteed flame resistance for the life of the garment.

Ideal for situations where extra visibility is required, FR95 is spacious and comfortable.

Features include an action back for ease of movement and an extra long shirt tail to ensure the garment stays in place when tucked in.

Protection against radiant, convective and contact heat.

Lightweight for enhanced wearing comfort.

Button cuffs for a secure and comfortable fit.

Sew on flame resistant industrial wash tape.

Colors: Yellow S-6XL

EN ISO 11612 (A1+A2, B1, C1, F1)
EN ISO 20471 Class 3
NFPA® 70E
NFPA® 2112
ASTM F1506
ASTM F1959/F1959M-12 (ATPV 9 cal cm2 (HAF 75.6%)) 

This stylish shirt is lightweight and comfortable.

Maximum protection is guaranteed with permanent flame resistance and ARC2 protection against electric arc.

The shirt tail will stay tucked in during movement and all day wear.

Handy features include adjustable button cuffs and flapped chest pockets.

Lightweight and comfortable.

Dual hazard protection.

Color: Grey S-5XL, Khaki S-5XL, Navy S-5XL

EN ISO 11612 (A1+A2, B1, C1)
NFPA® 70E
NFPA® 2112
ASTM F1506
IEC 61482-2 IEC 61482-1-1 (Elim 9.1 CAL/CM²)
ASTM F1959/F1959M-12 (ATPV 8.2 CAL/CM2 (HAF 69.1%))

Dual hazard protection.

Guaranteed flame resistance for life of garment.

8 pockets for ample storage.

Durable, strong and long lasting brass zipper.

Lightweight and comfortable.

CE Certified.

50+ UPF rated fabric to block 98% of UV rays.

Sew on flame resistant industrial wash tape.

Colors: Navy, Khaki, Gray, Orange, Red, Royal S-6XL

EN ISO 11612 (A1+A2, B1, C1)
NFPA® 70E
NFPA® 2112
ASTM F1506-10a
ASTM F1959/F1959M-12 (ATPV 8.2 CAL/CM2 (HAF 69.1%)) 

This high visibility jacket is independently certified to seven international standards making it the ideal choice when versatile protection is required. 

Ideal in combination with FR78 trouser.

Colors: Yellow/Navy M-XXL

ELIM TESTING IN PROGRESS
EN 1149 -5
EN ISO 11612 (A1, A2, B1, C1, E2)
EN ISO 11611 Class 2 (A1+A2)
IEC 61482-2 IEC 61482-1-2 Class 1
EN 13034 Type 6
EN ISO 20471 Class 3
EN 343 Class 3:3 

This comfortable trouser provides optimum protection in multi-risk environments.

Elasticated braces allow maximum ease of movement during the working day.

Ideal in combination with FR79 Parka.

Colors: Yellow/Navy M-XXL

ELIM TESTING IN PROGRESS
EN 1149 -5
EN ISO 11612 (A1, A2, B1, C1, E2)
EN ISO 11611 Class 2 (A1+A2)
IEC 61482-2 IEC 61482-1-2 Class 1
EN 13034 Type 6
EN ISO 20471 Class 2
EN 343 Class 3:3 

This bib and brace is constructed with high visibility reflective tape double stitched for enhanced durability.

Features include triple stitched seams, high visibility strips on the legs, two front patch pockets, one rule pocket, one front chest pocket, one back pocket with flap and stud closure and adjustable bottom leg opening.

Protection against radiant, convective and contact heat.

Class 2 welding protection.

Elasticated shoulder straps.

Triple-stitched seams for extra durability.

Certified protection against molten metal splash.

Sew on flame resistant industrial wash tape.

Color: Navy S-3XL, Orange S-4XL

EN ISO 11612 (A1+A2, B1, C1, E2, F1)
EN ISO 11611 Class 2 (A1+A2)
EN 1149 -5
IEC 61482-2 IEC 61482-1-1 (ELIM 8.6 CAL/CM², ATPV 9.8 CAL/CM²)
IEC 61482-2 IEC 61482-1-2 APC 1
EN 17353 Type B2 (TESTING IN PROGRESS)
ASTM F1959/F1959M-12 (ATPV=13.6 Cal/CM2 (HAF=82%))

This bib and brace is constructed with high visibility reflective tape double stitched for enhanced visibility.

Features include triple stitched seams, high visibility strips on the legs, two front patch pockets, one rule pocket, one front chest pocket, one back pocket with flap and stud closure and adjustable bottom leg opening.

Protection against radiant, convective and contact heat.

Class 2 welding protection.

Color: Navy/Red S-4XL, Navy/Royal S-3XL

EN ISO 11612 (A1+A2, B1, C1, E2, F1)
EN ISO 11611 Class 2 (A1+A2)
EN 1149 -5
IEC 61482-2 IEC 61482-1-1 (Elim 8.6 CAL/CM²)
IEC 61482-2 IEC 61482-1-2 APC 1
ASTM F1959/F1959M-12 (ATPV=13.6 Cal/CM2 (HAF=82%))

This jacket is constructed with high visibility reflective tape double stitched for enhanced durability.

Features include triple stitched seams, high visibility strips on shoulders, and arms, concealed front brass zip, two front chest pockets with flap and stud closure.

Adjustable sleeve opening.

Protection against radiant, convective and contact heat.

Class 2 welding protection.

Certified protection against molten metal splash.

40+ UPF rated fabric to block 98% of UV rays.

Color: Navy, Orange S - 4XL

EN ISO 11612 (A1+A2, B1, C1, E2, F1)
EN ISO 11611 Class 2 (A1+A2)
EN 1149 -5
IEC 61482-2 IEC 61482-1-1 (ELIM 8.6 CAL/CM², ATPV 9.8 CAL/CM²)
IEC 61482-2 IEC 61482-1-2 APC 1
EN 17353 Type B2 (TESTING IN PROGRESS)
ASTM F1959/F1959M-12 (ATPV=13.6 Cal/CM2 (HAF=82%))

This jacket is constructed with high visibility reflective tape double stitched for enhanced visibility.

Features include triple stitched seams, high visibility strips on shoulders and arms, concealed front brass zip, two front chest pockets with flap and stud closure.

Adjustable sleeve opening.

Protection against radiant, convective and contact heat.

Class 2 welding protection.

Certified protection against molten metal splash.

Color: Navy/Red S-4XL, Navy/Royal S-3XL

EN ISO 11612 (A1+A2, B1, C1, E2, F1)
EN ISO 11611 Class 2 (A1+A2)
EN 1149 -5
IEC 61482-2 IEC 61482-1-1 (Elim 8.6 CAL/CM²)
IEC 61482-2 IEC 61482-1-2 APC 1
ASTM F1959/F1959M-12 (ATPV=13.6 Cal/CM2 (HAF=82%))

Ideal for the demands of the off-shore industry this innovative FR coverall is specially tailored for the female form.

The perfect fit combined with the soft touch fabric provides outstanding all day comfort.

Protection against radiant, convective and contact heat.

Class 2 welding protection.

40+ UPF rated fabric to block 98% of UV rays.

Certified protection against molten metal splash.

Sew on flame resistant industrial wash tape.

Colors: Navy XS-XXL, Orange XS-XXL Short: 29” or 74cm adjustable to Reg 31” or 79cm

EN ISO 11612 (A1+A2, B1, C1, E2, F1)
EN ISO 11611 Class 2 (A1+A2)
EN 1149 -5
IEC 61482-2 IEC 61482-1-1 (Elim 8.6 cal/cm²)
IEC 61482-2 IEC 61482-1-2 APC 1
ASTM F1959/F1959M-12 (ATPV 13.6 cal cm2 (HAF 82%))

This lightweight coverall is ergonomically designed and uses the placement of stretch panels to give maximum range of movement when working.

Other practical features include upper and lower back ventilation, back elastication, adjustable hem to accommodate all leg lengths and multiple pockets provide secure storage.

Innovative stretch panelling in key movement areas provides excellent comfort and flexibility.

Protection against radiant, convective and contact heat.

Stretch crotch gusset provides maximum flexibility and reduces stress.

Colors: Navy S-3XL, Orange S-3XL
Reg: 31” or 79cm adjustable to Tall 33” or 84cm

EN ISO 11612 (A1+A2, B1, C1, E2, F1)
EN ISO 11611 Class 1 (A1+A2)
EN 1149 -5
IEC 61482-2 IEC 61482-1-1 (ELIM 9 CAL/CM²)

Contemporary work jacket that fits as good as it looks with innovative design features like stretch panelling provides excellent comfort and flexibility in key movement areas.

Other key features include upper and lower back ventilation,multiple pockets for ample storage, adjustable cuffs and reflective trims.

Protection against radiant, convective and contact heat.

Non-magnetic - nickel and ferrous free.

Hook and loop cuffs for a secure fit.

Sew on flame resistant industrial wash tape.

Two-way zip for quick and easy access.

Colors: Navy S-3XL, Orange S-3XL

EN ISO 11612 (A1+A2, B1, C1, E2, F1)
EN ISO 11611 Class 1 (A1+A2)
EN 1149 -5
IEC 61482-2 IEC 61482-1-1 (ELIM 9 CAL/CM², ATPV 9.4 CAL/CM²)

Contemporary work trouser made with lightweight FR cotton fabric with subtle stretch panels that allow for increased freedom of movement in all working positions.

Packed with functionality including a crotch gusset, two tier knee pad pockets and an adjustable leg length for added convenience.

Multi-functional thigh pockets provide secure storage of phones, pens and tools.

Innovative stretch panelling in key movement areas provides excellent comfort and flexibility.

Protection against radiant, convective and contact heat.

Stretch crotch gusset provides maximum flexibility and reduces stress.

Adjustable hem to accommodate all leg lengths.

Non-magnetic - nickel and ferrous free.

Sew on flame resistant industrial wash tape.

Two tier knee pad pockets allowing two positioning options.

Colors: Navy S-3XL, Orange S-3XL
Reg: 31” or 79cm adjustable to Tall 33” or 84cm

EN ISO 11612 (A1+A2, B1, C1, E2, F1)
EN ISO 11611 Class 1 (A1+A2)
EN 1149 -5
IEC 61482-2 IEC 61482-1-1 (ELIM 9 CAL/CM², ATPV 9.4 CAL/CM²)

This trouser is constructed with high visibility reflective tape double stitched for enhanced durability.

Features include triple stitched seams, high visibility strips on legs, knee pad pockets, ruler pocket, front fly brass zip and adjustable bottom leg opening.

Protection against radiant, convective and contact heat.

Class 2 welding protection.

Certified protection against molten metal splash.

40+ UPF rated fabric to block 98% of UV rays.

Sew on flame resistant industrial wash tape.

Color: Navy XS-4XL, Orange S-4XL

EN ISO 11612 (A1+A2, B1, C1, E2, F1)
EN ISO 11611 Class 2 (A1+A2)
EN 1149 -5
IEC 61482-2 IEC 61482-1-1 (ELIM 8.6 CAL/CM², ATPV 9.8 CAL/CM²)
IEC 61482-2 IEC 61482-1-2 APC 1
EN 17353 Type B2 (TESTING IN PROGRESS)
ASTM F1959/F1959M-12 (ATPV=13.6 Cal/CM2 (HAF=82%))

This trouser is constructed with high visibility reflective tape double stitched for enhanced visibility.

Features include triple stitched seams, high visibility strips on legs, knee pad pockets, ruler pocket, front fly brass zip and adjustable bottom leg opening.

Protection against radiant, convective and contact heat.

Certified protection against molten metal splash.

Half elasticated waist for a secure and comfortable fit.

Two tier knee pad pockets allowing two positioning options.

Color: Navy/Red S-4XL, Navy/Royal S-3XL

EN ISO 11612 (A1+A2, B1, C1, E2, F1)
EN ISO 11611 Class 2 (A1+A2)
EN 1149 -5
IEC 61482-2 IEC 61482-1-1 (Elim 8.6 CAL/CM²)
IEC 61482-2 IEC 61482-1-2 APC 1
ASTM F1959/F1959M-12 (ATPV=13.6 Cal/CM2 (HAF=82%))

This classic coverall is a great addition to the flame resistant range.

Offering lots of functional features such as a radio loop and concealed mobile phone pocket this style guarantees maximum comfort, performance and safety.

Protection against radiant, convective and contact heat.

Certified protection against molten metal splash.

Colors: Navy S-3XL

EN ISO 11612 (A1+A2, B1, C1, E3, F1)
EN ISO 11611 Class 1 (A1+A2)
EN 1149 -5

The Bizflame Pro Jacket provides comfort and outstanding protection.

Functional features include a chest pocket with a concealed mobile phone section and a handy radio loop.

EN 1149 -5
EN ISO 11612 (A1+A2, B1, C1, E3, F1)
EN ISO 11611 Class 1 (A1+A2)

This rugged trouser offers comfort, strength and protection to several EN standards.

Winning features include a comfort waistband, rule pocket and a handy patch pocket at the back.

EN 1149 -5
EN ISO 11612 (A1+A2, B1, C1, E3, F1)
EN ISO 11611 Class 1 (A1+A2)

Optimum protection is offered from this antistatic jacket.

Flame resistance coupled with superb breathable and water resistant properties ensures this garment is suitable for multi-risk environments.

Color: Navy , Royal , Red S-3XL

EN ISO 14116 Index 3
EN 1149 -5
EN 13034 Type 6
EN 343:2019 Class 3:1 X
EN 14058 Class 3

Ideal for inclement conditions, this lined, FR over trouser offers full waterproof protection in multi hazard environments.

The outer fabric is resistant to chemical splash.

Color: Navy S-4XL

EN ISO 14116 INDEX 3
EN 1149-5
IEC 61482-2 IEC 61482-1-1 PANEL TEST (FABRIC ONLY): ATPV=25.2 CAL/CM² (HAF=90.3%)
EN 13034 TYPE 6
EN 343 CLASS 3:3

This fully waterproof bomber jacket offers multi-norm protection in hazardous conditions.

Features include chemical resistance and a detachable hood.

Flame resistant treated waterproof fabric prevents water penetration.

Anti-static.

Fully lined and padded to trap the heat and increase warmth.

Premium sew on flame resistant reflective tape.

Breathable fabric to draw moisture away from the body keeping the wearer cool, dry and comfortable.

Taped seams to provide additional protection.

Color: Orange XS-4XL, Yellow XS-5XL

EN ISO 14116 Index 3
EN 1149 -5
EN 13034 Type PB [6]
EN ISO 20471 Class 3
RIS 3279 TOM Issue 2 (Orange Only)
EN 343 Class 3:1 X

Optimum protection is offered from this antistatic jacket.

Flame resistance coupled with superb breathable and water resistant properties, means this garment meets the necessary stringent European standards.

Anti-static.

Waterproof and breathable with taped seams to prevent water penetration.

Breathable fabric to draw moisture away from the body keeping the wearer cool, dry and comfortable.

Color: Orange XS-5XL, Yellow XS-6XL

EN ISO 14116 Index 3
EN 1149 -5
EN 13034 Type PB [6]
EN ISO 20471 Class 3
RIS 3279 TOM Issue 2 (Orange Only)
EN 343 Class 3:1 X
EN 14058 Class

Premium protection coverall combining hi-vis, flame resistant, chemical-resistant, anti-static, waterproof and breathable protection.

Designed specifically for the oil and gas industry, this coverall is packed full of features such as: Full front stormflap with touch and grip fastening, fully lined, detachable hood, two large cargo thigh pockets & concealed phone pocket, zipped side opening on legs making it easier to take on and take off and shoulder reflective tape for maximum visibility.

Flame resistant treated waterproof fabric prevents water penetration.

Fully lined and padded to trap the heat and increase warmth.

Zipped ankles for easy fitting over work boots.

Contrast panels for protection against dirt.

Reinforced seams for extra durability and strength.

Anti-static.

Premium sew on flame resistant reflective tape.

Color: Orange/Navy S-3XL, Yellow/Navy S-3XL

EN ISO 14116 Index 3
EN 1149 -5
EN 13034 Type 6
EN ISO 20471 Class 3
RIS 3279 TOM Issue 2 (Orange Only)
EN 343 Class 3:1 X

 A great value addition to our Multi-Protection Range, the S774 jacket is an unpadded lightweight jacket hosting a multitude of functional features and benefits.

Flame resistant treated waterproof fabric prevents water penetration.

FR cotton lined for added warmth and comfort.

Knitted cuff for comfort and warmth.

External standards label for quick identification of protection levels.

Anti-static.

Breathable fabric to draw moisture away from the body keeping the wearer cool, dry and comfortable.

Taped seams to provide additional protection.

Premium sew on flame resistant reflective tape.

Color: Orange, Yellow S – 3XL

EN ISO 14116 Index 3
EN 1149 -5
EN 13034 Type PB [6]
EN ISO 20471 Class 3
RIS 3279 TOM Issue 2 (Orange Only)
EN 343 Class 3:3 X

 This multi-protection waterproof, breathable jacket offers protection against multiple risks. 

A detachable FR fleece liner makes this jacket suitable for use in all weather conditions. 

Jacket to be worn with trousers for full protection.

Color: Orange/Navy S-3XL Yellow/Navy XS-4XL

EN ISO 14116 Index 3
EN 1149 -5
RIS-3279-TOM ISSUE 1 (ORANGE ONLY)
EN 13034 Type 6
EN ISO 20471 Class 3
EN 343 Class 3:3 

This waterproof, breathable parka offers protection in multi-hazard environments.

The detachable, FR fleece liner offers additional warmth in extreme weather conditions.

Color: Navy S-3XL

EN ISO 14116 INDEX 3
EN 1149-5
IEC 61482-2 IEC 61482-1-1 PANEL TEST (FABRIC ONLY): ATPV=25.2 CAL/CM² (HAF=90.3%) (WITHOUT FLEECE)
EN 13034 TYPE 6
EN 343 CLASS 3:3

Breathable and waterproof, this superb flame resistant and antistatic garment provides everything you need.

The fully elasticated waistband and back waist buggy maximise comfort, the braces are fitted with a quick release buckle system.

Anti-static.

Breathable fabric to draw moisture away from the body keeping the wearer cool, dry and comfortable.

Premium sew on flame resistant reflective tape.

Taped seams to provide additional protection.

Color: Orange S-3XL, Yellow S-4XL

EN ISO 14116 Index 1
EN 1149 -5
EN 13034 Type PB [6]
EN ISO 20471 Class 1
RIS 3279 TOM Issue 2 (Orange Only)
EN 343 Class 3:3 X

This hi-vis anti-static coverall has a concealed brass zip on each chest pocket and front opening.

This coverall offers the optimum solution for those in a service position.

Protection against radiant, convective and contact heat.

Certified protection against molten metal splash.

Sleeve pocket.

Premium sew on flame resistant reflective tape.

Knee pad pockets to facilitate knee pads.

Color: Yellow/Red S – 3XL

EN ISO 11612 (A1+A2, B1, C1, E3, F1)
EN ISO 11611 Class 1 (A1+A2)
EN 1149 -5
EN ISO 20471 Class 3

Independently certified to five international safety standards, the Bizflame Ultra coverall is built for versatility.

The special FR polyester in the fabric ensures maximum longevity in the toughest environments.

Industrial laundry wash 75°C and tunnel dry 155°c.

100% metal free.

Shoulder pad pockets for extra protection around the shoulder area.

External standards label for quick identification of protection levels.

Texpel stain resistant finish repels dirt and stains.

Protection against radiant, convective and contact heat.

Certified protection against molten metal splash.

Colors: Grey, Navy, Orange, Red, Royal Blue
Reg: 31” or 79cm adjustable to Tall 33” or 84cm

EN ISO 11612 (A1+A2, B1, C1, E2, F1)
EN ISO 11611 Class 1 (A1+A2)
EN 1149 -5
IEC 61482-2 IEC 61482-1-1 (Elim 11 CAL/CM²)
IEC 61482-2 IEC 61482-1-2 APC 1
EN 13034 Type 6
ASTM F1959/F1959M-12 (ATPV 16 CAL/CM2 (HAF 83.7%))

Designed for working in hazardous conditions both off-shore or on-site, this jacket combines style with performance.

The special blend of FR Polyester in the fabric, provides unbeatable durability in the toughest of conditions.

Industrial laundry wash 75°C and tunnel dry 155°c.

Protection against radiant, convective and contact heat.

External standards label for quick identification of protection levels.

Certified protection against molten metal splash.

Color: Grey S-3XL, Royal Blue S-3XL

EN ISO 11612 (A1+A2, B1, C1, E2, F1)
EN ISO 11611 Class 1 (A1+A2)
EN 1149 -5
IEC 61482-2 IEC 61482-1-1 (Elim 11 CAL/CM²)
IEC 61482-2 IEC 61482-1-2 APC 1
EN 13034 Type PB [6]
ASTM F1959/F1959M-12 (ATPV 16 CAL/CM² (HAF 83.7%))

Contemporary design using durable fabric, combining comfort and functionality.

The hardwearing fabric is tough enough to withstand the rigours of industrial laundry, retaining shape and colour over the lifetime of the trousers.

Industrial laundry wash 75°C and tunnel dry 155°c.

Protection against radiant, convective and contact heat.

Adjustable hem to accommodate all leg lengths.

Certified protection against molten metal splash.

100% metal free.

Color: Grey, Royal Blue, Reg: 31” or 79cm adjustable to Tall 33” or 84cm

EN ISO 11612 A1+A2, B1, C1, E2, F1
EN ISO 11611 CLASS 1 A1+A2
EN 1149-5
IEC 61482-2 IEC 61482-1-1 ELIM 11 CAL/CM²
IEC 61482-2 IEC 61482-1-2 APC 1
EN 13034 TYPE PB [6]
ASTM F1959/F1959M-12 ATPV 16 CAL/CM² (HAF 83.7%)

Offering a more formal look, this lightweight long sleeve shirt protects against heat, flame, anti-static and light chemical hazards.

The concealed stud front fastening enhances the professional appearance whilst also offering maximum FR protection and all-day comfort.

Protects against radiant and convective heat.

Stud adjustable cuffs for a secure fit.

Shirt tail hem stays tucked in.

2 pockets for secure storage.

CE-CAT III.

CE certified.

UKCA marked.

Color: Blue S-3XL, Navy S-3XL

EN ISO 11612 (A1, B1, C2)
EN 1149 -5
EN 13034 Type PB [6]

 EN ISO 14116 Index 1
EN 1149 -5
EN 13034 Type 6 PB 

Exceptional Flame Resistance and Breathability Combined

The SMS FR Coverall was developed using innovative non-woven fabric technology.

The fabric is breathable, generously cut and comfortable to wear for prolonged periods of time.

The main characteristic of this coverall is the resistance to noxious dust and splash as well as being anti-static and fire resistant.

Guaranteed flame resistance for life of garment.

Sealable zip storm flap for extra protection.

Elasticated cuffs for a secure fit.

Ergonomically shaped hood for a perfect fit.

CE-CAT III.

Elasticated hem for a secure and comfortable fit.

Color: White M-3XL

EN ISO 13982 Type 5
EN 1073-2
EN ISO 14116 Index 1
EN 13034 Type 6
EN 1149 -5

The Bizweld Cargo trouser offers protection against the thermal hazard of electric arc and guarantees flame resistance for the life of the garment.

This modern trouser has an elastic waist band for comfort and ease of movement.

A range of ample pockets allow for convenient storage.

Dual hazard protection.

Protection against radiant, convective and contact heat.

Certified protection against molten metal splash.

40+ UPF rated fabric to block 98% of UV rays.

Color: Grey, Navy S to 5XL

EN ISO 11612 (A1+A2, B1, C1, E2, F1)
EN ISO 11611 Class 1 (A1+A2)
IEC 61482-2 IEC 61482-1-1 (Elim 8.3 CAL/CM²)
NFPA® 70E
NFPA® 2112
ASTM F1506
ASTM F1959/F1959M-12 (ATPV 11.2 CAL/CM2 (HAF = 80.4%))

Voted the number one favourite coverall in the welding industry, our best selling Bizweld coverall is ideal for offering complete protection to workers exposed to heat.

The generous fit provides comfort and allows the wearer to work unhindered whilst ample storage space, rule pocket and concealed mobile phone pocket hold equipment securely and safely.

Protection against radiant, convective and contact heat.

Certified protection against molten metal splash.

Color: Black, Navy, Orange, Red, Royal Blue

EN ISO 11612 (A1+A2, B1, C1, E2, F1)
EN ISO 11611 Class 1 (A1+A2)
IEC 61482-2 IEC 61482-1-1 (Elim 8.3 CAL/CM²)
ASTM F1959/F1959M-12 (ATPV 11.2 CAL/CM2 (HAF = 80.4%))

 The Bizweld Hooded Coverall offers a built-in head protection option to the wearer plus added design features including knee pad pockets and a back hip pocket with flap.

Color: Navy S-3XL

ELIM TESTING IN PROGRESS
EN ISO 11612 (A1+A2, B1, C1, E2, F1)
EN ISO 11611 Class 1 (A1+A2)
ASTM F1959/F1959M-12 (ATPV 11.2 CAL/CM2 (HAF = 80.4%)) 

The Bizweld Iona FR Coverall offers visible protection to the wearer.

Clever design features include flame resistant reflective tape on the shoulders, sleeves and legs, the option to insert knee pads when needed, ample storage space and a rule pocket.

A very popular style.

Protection against radiant, convective and contact heat.

Certified protection against molten metal splash.

Color: Black, Navy, Orange, Red, Royal Blue

EN ISO 11612 (A1+A2, B1, C1, E2, F1)
EN ISO 11611 Class 1 (A1+A2)
IEC 61482-2 IEC 61482-1-1 (Elim 8.3 CAL/CM²)
ASTM F1959/F1959M-12 (ATPV 11.2 CAL/CM2 (HAF = 80.4%))

Certified.

ARC2.

Protection against radiant, convective and contact heat.

Certified protection against molten metal splash.

Sew on flame resistant industrial wash tape.

10 pockets for ample storage.

Available in sizes up to 6XL.

50+ UPF rated fabric to block 98% of UV rays.

Color: Navy , Orange

EN ISO 11612 NONE (A1+A2, B1, C1, E1, F1)
EN ISO 11611 Class 1 (A1+A2)
NFPA® 70E NONE
ASTM F1506-10a NONE
NFPA® 2112 NONE
ASTM F1959/F1959M-12 NONE (ATPV 11.2 CAL/CM2 (HAF = 80.4%)) 

This Bizweld Iona Jacket offers superb comfort, protection and functionality.

Design features include concealed stud front closure, two chest pockets with flaps, concealed mobile phone pocket and flame resistant reflective tape on the shoulders and sleeves for ultimate visibility.

Protection against radiant, convective and contact heat.

Premium sew on flame resistant reflective tape.

Color: Navy , Orange S-3XL

EN ISO 11612 (A1+A2, B1, C1, E2, F1)
EN ISO 11611 Class 1 (A1+A2)
IEC 61482-2 IEC 61482-1-1 (Elim 8.3 CAL/CM²)
ASTM F1959/F1959M-12 (ATPV 11.2 CAL/CM2 (HAF = 80.4%))

The Bizweld Iona Trouser offers enhanced comfort and performance.

Providing excellent welding properties, this trouser gives outstanding multi purpose protection against radiant heat and molten iron splashes.

Key features include side pockets, rule pocket and reflective tape at leg ends.

Protection against radiant, convective and contact heat.

Premium sew on flame resistant reflective tape.

Twin-stitched seams for extra durability.

40+ UPF rated fabric to block 98% of UV rays.

Color: Navy , Orange S-3XL

EN ISO 11612 (A1+A2, B1, C1, E2, F1)
EN ISO 11611 Class 1 (A1 + A2)
IEC 61482-2 IEC 61482-1-1 (Elim 8.3 CAL/CM²)
ASTM F1959/F1959M-12 (ATPV 11.2 CAL/CM2 (HAF = 80.4%))

The Bizweld Jacket provides the wearer with all day protection and comfort.

Features include secure stud fasteners down the front and two chest pockets with flaps.

This flame resistant jacket also includes a concealed mobile phone pocket.

Protection against radiant, convective and contact heat.

Certified protection against molten metal splash.

External standards label for quick identification of protection levels.

Colors: Black S-3XL, Navy XS-5XL, Orange S-3XL, Royal Blue S-3XL

EN ISO 11612 (A1+A2, B1, C1, E2, F1)
EN ISO 11611 Class 1 (A1+A2)
IEC 61482-2 IEC 61482-1-1 (Elim 8.3 CAL/CM²)
ASTM F1959/F1959M-12 (ATPV 11.2 CAL/CM2 (HAF = 80.4%))

The Bizweld Mole Coverall offers a coverall with heavy duty front stud closure.

One internal chest pocket, two front swing pockets, two large back pockets with flaps, the option to insert knee pads when needed, ample storage space and a rule pocket.

EN 1149 -5
EN ISO 11612 (A1+A2, B2, C1, E3, F1)
EN ISO 11611 Class 2 (A1+A2)
IEC 61482-2 IEC 61482-1-2 Class 1 

Designed to give maximum protection and comfort to the wearer, the Bizweld™ Trousers will keep you safe.

The garment has twin stitched seams for extra stength and side pockets with a conveniently placed rule pocket for quick and easy accessibility.

Protection against radiant, convective and contact heat.

Certified protection against molten metal splash.

Durable, strong and long lasting brass zip.

Twin-stitched seams for extra durability.

40+ UPF rated fabric to block 98% of UV rays.

Color: Black, Navy, Orange, Royal Blue

EN ISO 11612 (A1+A2, B1, C1, E2, F1)
EN ISO 11611 Class 1 (A1+A2)
IEC 61482-2 IEC 61482-1-1 (Elim 8.3 CAL/CM²)
ASTM F1959/F1959M-12 (ATPV 11.2 CAL/CM2 (HAF = 80.4%))

Designed to give maximum protection and comfort to the wearer, the Bizweld cape hood will help keep you safe in dangerous work environments.

The cape hood is made with a self fabric drawcord to allow for adjustment for a comforatble fit.

Must be worn with a suitable coverall or jacket/trouser combination.

Protection against radiant, convective and contact heat.

Certified protection against molten metal splash.

Designed with a comfort fit.

CE-CAT III.

40+ UPF rated fabric to block 98% of UV rays.

Colors: Navy One Size

EN ISO 11612 (A1+A2, B1, C1, E2, F1)
EN ISO 11611 Class 1 (A1+A2)
ASTM F1959/F1959M-12 (ATPV 11.2 CAL/CM2 (HAF = 80.4%))

Offering complete protection all day long and fantastic value for money, the Safe-Welder™ Coverall is a great choice for welders and industrial workers who are exposed to heat

Constructed with a double sided anti-pill fleece.

Features include two side pockets with concealed zip closure to keep belongings secure.

Comfortable elasticated cuffs and drawstring at hem.

Inherent flame resistant qualities will not diminish with washing.

Protects against radiant and convective heat.

High cotton content for superior comfort.

Anti-static.

Color: Navy S-3XL

EN ISO 11612 (A1, B1, C2)
EN 1149 -5
IEC 61482-2 IEC 61482-1-1 (Elim 5.9 CAL/CM² )
IEC 61482-2 IEC 61482-1-2 APC 1

The lightweight, modacrylic fabric together with the reflective strips provide the wearer with advanced visibility and protection in hazardous situations.

Features include concealed front button opening and contrast colour on the collar and cuffs.

Inherent flame resistant qualities will not diminish with washing.

Protection against radiant, convective and contact heat.

Flame resistant ribbed cuff for added safety.

High cotton content for superior comfort.

Premium sew on flame resistant reflective tape.

40+ UPF rated fabric to block 98% of UV rays.

CE certified.

CE-CAT III.

Color: Yellow S – 4XL

EN ISO 11612 (A1, B1, C1, F1)
EN 1149 -5
IEC 61482-2 IEC 61482-1-1 (Elim 4.4CAL/CM² )
IEC 61482-2 IEC 61482-1-2 APC 1
EN ISO 20471 Class 3
ASTM F1959/F1959M-12 (EBT = 4.3 CAL/CM2 (HAF = 66%))

Ideal for cooler conditions to keep the head and neck warm.

The ribbed fabric allows for a snug comfortable fit.

The ribbed fabric allows for a snug comfortable fit.

Wear with the FR10, FR11 or FR12.

Inherent flame resistant qualities will not diminish with washing.

Protection against radiant, convective and contact heat.

Anti-static.

High cotton content for superior comfort.

Designed with a comfort fit.

2 layer.

Color: Black One Size, Navy One Size, Yellow One Size

EN ISO 11612 (A1, B1, C1, F1)
EN 1149 -5
ASTM F1959/F1959M-14e1 (ATPV 22CAL/CM² (HAF 89.7%))

This coverall is perfect for the demands of the offshore industry.

Constructed with a highly innovative flame-retardant fabric with high visibility reflective tape double stitched for enhanced visibility.

Meeting all the required EN standards, features include triple stitched seams, high visibility strips on shoulders, arms and legs, concealed 2-way front brass zip and two front slant chest pockets with concealed brass zips.

Protection against radiant, convective and contact heat.

Class 2 welding protection.

Triple-stitched seams for extra durability.

10 pockets for ample storage.

40+ UPF rated fabric to block 98% of UV rays.

Color: Black, Grey, Navy, Orange, Red, Royal Blue, White

EN ISO 11612 (A1+A2, B1, C1, E2, F1)
EN ISO 11611 Class 2 (A1+A2)
EN 1149 -5
IEC 61482-2 IEC 61482-1-1 (ELIM 8.6 CAL/CM²)
IEC 61482-2 IEC 61482-1-2 APC 1
ASTM F1959/F1959M-12 (ATPV=13.6 Cal/CM2 (HAF=82%))

This inherently flame resistant sweatshirt is designed to give high visibility protection from every direction.

Features include snug rib knit cuffs & hem to give a stylish, comfortable fit.

Inherent flame resistant qualities will not diminish with washing.

Protection against radiant, convective and contact heat.

High cotton content for superior comfort.

Premium sew on flame resistant reflective tape.

40+ UPF rated fabric to block 98% of UV rays.

Color: Yellow S-3XL

EN ISO 11612 (A1, B1, C1, F1)
EN 1149 -5
IEC 61482-2 IEC 61482-1-1 (Elim 9.2 CAL/CM² )
IEC 61482-2 IEC 61482-1-2 APC 1
EN ISO 20471 Class 3
ASTM F1959/F1959M-12 (ATPV=16 Cal/CM2 (HAF=86%))

Designed for cooler conditions to keep the wearer warm, comfortable and safe.  Elasticated waistband allows freedom of movement and the ribbed hem cuffs help trap in heat.

Convenient for cooler weather and ideal for workers in industries exposed to heat.

The stylish design of the garment has a 3-button placket, finished with a ribbed collar and cuffs.

Inherent flame resistant qualities will not diminish with washing.

Protection against radiant, convective and contact heat.

High cotton content for superior comfort.

Color: Black S-3XL, Grey S-3XL, Navy XS-5XL

EN ISO 11612 (A1, B1, C1, F1)
EN 1149 -5
IEC 61482-2 IEC 61482-1-1 (Elim 4.4 CAL/CM² )
IEC 61482-2 IEC 61482-1-2 APC 1
ASTM F1959/F1959M-12 (EBT = 4.3 CAL/CM2 (HAF = 66%))

This modacrylic blend polo shirt is ideal for warmer conditions or for layering with outer garments when extra insulation is required.

Flame resistant reflective tape offers enhanced visibility in low light conditions.

Inherent flame resistant qualities will not diminish with washing

Protection against radiant, convective and contact heat.

100% metal free.

Color: Navy S-3XL

EN ISO 11612 (A1, B1, C1, F1)
EN 1149 -5
IEC 61482-2 IEC 61482-1-1 (Elim 4.4 CAL/CM² )
IEC 61482-2 IEC 61482-1-2 APC 1
ASTM F1959/F1959M-12 (EBT = 4.3 CAL/CM2 (HAF = 66%))

Ideal for workers exposed to heat in their working environment.

Features on this garment include raglan sleeve, round neck, ribbed collar and cuffs, making it comfortable and easy to wear.

Inherent flame resistant qualities will not diminish with washing.

Protection against radiant, convective and contact heat.

Anti-static.

Color: Navy XS-4XL

ELIM TESTING IN PROGRESS
EN 1149 -5
EN ISO 11612 (A1, B1, C1, F1)
IEC 61482-2 IEC 61482-1-2 Class 1
ASTM F1959/F1959M-12 (ATPV=16 Cal/CM2 (HAF=86%))

High quality construction and premium materials set this Flame-Resistant Anti-Static Long Sleeve T-Shirt aside from its competitors.

This inherently flame resistant neck tube is essential to any winter kit.

The high cotton content provides maximum comfort.

Ideal for use in cold conditions.

Color: Black, Navy-One Size

EN ISO 11612 (A1, B1, C1, F1)
EN 1149 -5
ASTM F1959/F1959M-14e1 (ATPV 22CAL/CM² (HAF 89.7%))

High Visibility breathable Micro Mesh long sleeve Flame Resistant polo with 3 button closure and a single breast pocket.

Made from the worlds latest Micro Mesh Technology with Flame Resistant yarn and anti-static carbon fibre thread.

This garment is finished with a Texpel treatment to protect from staining, lock in brightness and keep fabric cool.

Color: Orange S-4XL, Yellow S, M, XL, 4XL

AS/NZS 4602.1:2011 Class D
EN 1149 -5
EN 533

This high quality, long sleeve poloshirt offers exceptional protective properties to the wearer.

Features include concealed front button placket opening, contrast rib collar and cuffs.

Inherent flame resistant qualities will not diminish with washing.

Protection against radiant, convective and contact heat.

High cotton content for superior comfort.

Color: Yellow/Navy S – 4XL

EN ISO 11612 (A1, B1, C1, F1)
EN 1149 -5
IEC 61482-2 IEC 61482-1-1 (Elim 4.4 CAL/CM² )
IEC 61482-2 IEC 61482-1-2 APC 1
EN ISO 20471 Class 2
ASTM F1959/F1959M-12 (EBT = 4.3 CAL/CM2 (HAF = 66%))

Flame Retardant 100% Cotton Cargo Pant allowing a natural fibre against the skin.

Unique in-house FR development tested to last a minimum 60 washes using a normal washing cycle

Cargo and ruler pockets with adjustable waist and FR Plastic button and zipper.

Color: Navy 77R-112R, 87ST-137ST, 79L-94L

EN ISO 14116 Index 3 (/5H/40 )
ASTM F1959/F1959M-12 (ATPV = 8.3 CAL/CM2, (HAF = 70%))

Flame Retardant 100% Cotton Cargo Pant with tape allowing a natural fibre against the skin.

Unique in-house FR development tested to last a minimum 60 washes using a normal washing cycle.

Cargo and ruler pockets with adjustable waist and FR Plastic button and zipper.

FR Reflective Tape around knees.

Fabric conforms to ARC2 = 8.3cal/cm².

50+ UPF rated fabric to block 98% of UV rays.

Color: Navy 77R-117R, 87ST-137ST, 79L-94L

AS 4399 (UPF 50+)
EN ISO 14116 Index 3
ASTM F1959/F1959M-12 (ATPV = 8.3 CAL/CM2, (HAF = 70%))

Flame resistant 100% Cotton coverall with flame resistant HiVisTex reflective tape around the body, arms and knees for optimum comfort and visibility.

This flame resistant garment is tested to last a minimum of 60 washes using a normal washing cycle.

Flame resistant stud closures.

Fabric conforms to ARC1 = 6.3cal/cm².

Outstanding colour fastness and shrinkage results.

50+ UPF rated fabric to block 98% of UV rays.

Color: Orange 77R-117R, 87ST-137ST, 79L-94L

AS 4602.1 Class D/N
AS/NZS 1906.4:2010
AS 4399 (UPF 50+)
EN ISO 14116 Index 3
ASTM F1959/F1959M-12 (ATPV = 6.3Cal/CM2 , HAF = 72%)

Constructed using a lighter weight highly innovative flame resistant BizFlame™ Plus fabric.

EN 1149 -5
EN ISO 11612 (A1+A2, B1, C1, F1)
EN ISO 11611 Class 2 (A1+A2)

Flame Retardant 100% Cotton Drill Shirt.

Garment is tested to a minimum of 60 washes using a normal washing cycle.

Flame retardant closures and trims including Flame resistant plastic buttons and flame resistant Lumentex reflective tape.

Lumentex flame resistant tape wraps the body and arm of the garment keeping the wearer visible.

Color: Orange/Navy, Yellow/Navy S-5XL

AS/NZS 4602.1:2011 Class D/N
EN ISO 14116 Index 3 (/5H/40 )
ASTM F1959/F1959M-12 (ATPV = 5.2CAL/CM2, (HAF=70%))

This coverall is perfect for the extra warm weather demands of the offshore industry.

Constructed with a lighter weight highly innovative flame-resistant twill fabric.

Lightweight for enhanced wearing comfort.

Protection against radiant, convective and contact heat.

Durable, strong and long lasting brass zip.

Action back for extra freedom of movement.

Color: Black, Grey, Khaki, Navy, Orange, Red, Royal Blue

EN ISO 11612 (A1+A2, B1, C1, E2,F1)
EN ISO 11611 Class 1 (A1+A2)
EN 1149 -5
ASTM F1959/F1959M-12 (ATPV = 9.1cal/cm²)

Foundry Heatbeater™ is a coated glass fabric glove with a Kevlar® felt and glass lining that provides optimum protection from contact heat.

The Foundry Heatbeater™ achieves EN407 Level 4 for contact heat, withstanding temperatures of up to 500°C.

It has an aluminised glass fabric cuff offering additional protection to the forearm and helping to radiate heat away from the glove.

It has excellent tear resistance enhancing mechanical protection and increasing durability, whilst the felt lining ensures comfort for the wearer.

The Foundry Heatbeater™ is the ideal choice of glove in industries where there is a high risk of injury from heat.

Size: One Size (40cm)

This inherently flame resistant balaclava will retain its shape wear after wear.

The high cotton content gives maximum comfort against the skin.

The fabric is inherently anti-static and provides ARC2 protection against the thermal hazard of an electric arc.

ASTM F1959/F1959M-12 (ATPV 16 CAL/CM2 (HAF 86%))
EN ISO 11612 (A1, B1, C1, F1)
IEC 61482-2 IEC 61482-1-2 Class 1
EN 1149 -5

FR20 is inherently flame resistant and antistatic.

The fabric provides ARC2 protection against the thermal hazard of an electric arc and the high cotton content gives maximum comfort against the skin.

Ideal when extra warmth and protection are required.

EN 1149 -5
NFPA® 70E
EN ISO 11612 (A1, B1, C1, F1)
IEC 61482-2 IEC 61482-1-2 Class 1
ASTM F1959/F1959M-12 (ATPV=16 Cal/cm2 (HAF=86%))

This Winter FR Coverall is perfect for the demands of the offshore industry.

Constructed with the same outer fabric as the FR50 and combined with a layer of insulation and FR cotton lining for extra warmth.

Meeting all the required standards, features include triple stitched seams,concealed 2-way front brass zip and two front slant chest pockets with concealed brass zips.

The garment also has knee pad pockets designed with an innovative two tier adjustable system.

Protection against radiant, convective and contact heat.

FR cotton lined for added warmth and comfort.

Action back for extra freedom of movement.

Color: Navy S-3XL, Orange S-3XL, Royal Blue S-3XL, Red S-3XL

EN ISO 11612 (A1+A2, B1, C1, E2, F1)
EN ISO 11611 Class 2 (A1+A2)
EN 1149 -5
EN 342 (0.318 (M².K/W), 2, X)

This Winter FR Jacket is perfect for the demands of the offshore industry.

Constructed with the same outer fabric as the FR50 and combined with an extra thick wadding insulation and FR cotton lining for extra warmth.

This style also has high visibility reflective tape double stitched for enhanced visibility.

Meeting all the required EN standards including the welding standard.

Features include triple stitched seams, high visibility strips on shoulders, arms and body, concealed 2-way front brass zip and two front slant chest pockets with flaps.

The garment also has an inner waist adjustment for a snug fit.

This style has the added benefit of a detachable hood with brass zip attachment.

Protection against radiant, convective and contact heat.

Class 2 welding protection.

Premium sew on flame resistant reflective tape.

Color: Navy S-3XL, Orange S-3XL, Red S-3XL, Royal Blue S-3XL

EN ISO 11612 (A1+A2 B1, C1, E2, F1)
EN ISO 11611 Class 2 (A1+A2)
EN 1149 -5
EN 342 (0.321 (M².K/W), 2, X)

This Winter FR Bib and Brace is perfect for the demands of the offshore industry. Constructed with the same outer fabric as the FR50 and combined with a layer of adding insulation and FR cotton lining for extra warmth. This style also has high visibility reflective tape double stitched for enhanced visibility. Meeting all the required EN standards including the welding standard. Features include triple stitched seams, high visibility strips on the legs, concealed front brass zip and size leg zips to allow for room when putting on over large boots.

EN ISO 11612 (A1+A2 B1, C1, E2, F1)
EN 1149 -5
EN 342 (0.451m2.K/W(B) X,2,X)
EN ISO 11611 Class 2 (A1+A2)

ARC4.

Dual hazard protection.

Durable water repellent fabric.

Fully quilt lined.

Adjustable straps for a personal fit.

Ankle-to-thigh brass zippers on side legs to accommodate work boots

Flame resistant lining for added protection.

Color: Brown S-5XL

NFPA® 70E
NFPA® 2112
ASTM F1506-10a (None)
ASTM F1959/F1959M-14e1 (ATPV 45 CAL/CM2 (HAF 94.2%))

ARC4.

Dual hazard protection.

Durable water repellent fabric.

Quilt lined hood.

Full quilt lined body and sleeves.

Pockets: 2 front, 2 internal.

Brass flame resistant front zipper.

Color: Brown S-5XL

NFPA® 70E
NFPA® 2112
ASTM F1506-10a (None)
ASTM F1959/F1959M-14e1 (ATPV 45 CAL/CM2 (HAF 94.2%))

This comfortable t-shirt is made from an interlock knit fabric which is lightweight but offers high insulation.

Ideal for use in a range of industries, this item offers permanent flame resistant.

Inherent flame resistant qualities will not diminish with washing.

Protects against radiant and convective heat.

High cotton content for superior comfort.

Generous fit for wearer comfort.

Reflective tape for increased visibility.

40+ UPF rated fabric to block 98% of UV rays.

Premium sew on flame resistant reflective tape.

Color: Yellow S-3XL

EN ISO 11612 (A1+A2, B1, C1)
EN ISO 11611 Class 1 (A1)
EN 1149 -5
IEC 61482-2 IEC 61482-1-1 (Elim 8.2 CAL/CM² )
IEC 61482-2 IEC 61482-1-2 APC 1
EN ISO 20471 Class 3
ASTM F1959/F1959M-12 (ATPV 9 CAL/CM2 (HAF 80.8%))

This lightweight shirt will keep you comfortable and protected in the toughest environments with high visibility reflective tape for enhanced visibility.

The shirt tail will stay tucked in during movement and all day wear.

Handy features include adjustable button cuffs and flapped chest pockets.

Protection against radiant, convective and contact heat.

Premium sew on flame resistant reflective tape.

40+ UPF rated fabric to block 98% of UV rays.

CE certified.

CE-CAT III.

UKCA marked.

Color: Navy S-3XL, Orange S-3XL

EN ISO 11612 (A1+A2, B1, C1, E2,F1)
EN ISO 11611 Class 1 (A1+A2)
EN 1149 -5
IEC 61482-2 IEC 61482-1-1 (ELIM 9 CAL/CM²)

Two piece suit, jacket with attached hood and drawstring.

Limited Flammability features.

Elastic suspenders with easy release snaps.

Conforms to NFPA 701:2015

Heavy duty protection against chemical splash.

Tough scrim material double coated with two thick layers of PVC for a combined thickness of 0.45mm.

Strong welded seams, heavy duty zipper and limited flammability.

Standards: ASTM D6413, NFPA 701:2010

Flame resistant coat designed to be worn over flame resistant garments.

Constructed with a comfortable, light weight, highly innovative flame-resistant twill fabric.

Protection against radiant, convective and contact heat.

Lightweight for enhanced wearing comfort.

40+ UPF rated fabric to block 98% of UV rays.

CE-CAT III.

Colors: Navy S-3XL

EN ISO 11612 (A1+A2, B1, C1, E2,F1)
EN ISO 11611 Class 1 (A1+A2)
EN 1149 -5
ASTM F1959/F1959M-14e1 (ATPV 9.1cal/cm² )

Granite 5® Beta from Polyco is a high quality leather glove with a seamless knitted Kevlar® liner, providing ultimate mechanical protection.

Made from a superior grain leather, it has a reinforced thumb crotch, a protective vein patch and additional leather protection to the back of the wrist.

The leather is reinforced with a seamless Kevlar® liner which provides maximum cut and puncture resistance.

The Kevlar® yarn is made with a soft finish to prevent irritation allowing the glove to worn for long periods without discomfort, and for extra strength and protection, double-stitched Kevlar® thread is used throughout. 

Built to handle the most extreme occupational heat hazards, HexArmor’s HeatArmor® series is built from the inside out, with technologies that provide industry-leading protection, fit, comfort, and longevity.

The HeatArmor® 1022 heat and flame resistant apron is built with a cut-resistant inner layer, while the exterior includes our revolutionary, long-lasting HeatHide® split cowhide leather to protect against heat and prevent leather from becoming brittle or shrinking.

Knit: 13-gauge aramid and wool blend shell offering 360° degree cut protection with flame-resistant properties.

Can be used as a glove or under glove with an appropriate top-glove solution.

Knit wrist helps prevent dirt and debris from entering the glove.

Silicone-free.

Knit: 13-gauge flame-resistant aramid and wool blend shell offering 360° degree cut protection.

Coating: Flexible FR-compliant neoprene/nitrile blend palm coating.

Arc Flash Level 2 Rating: Lab tested in accordance with HRC ATPV at 8.6 cal/cm2.

ANSI/ISEA Level A3 cut protection.

EN407 tested for Burning Behavior Level 4, Contact Heat Level 2, Convective Heat Level 3, Radiant Heat Level 1, and Small Splashes of Molten Metal Level 2.

Knit wrist helps prevent dirt and debris from entering the glove.

Silicone-free.

Sizes: 7/S through 11/XXL

Built to battle high heat and intense situations, FireArmor® SR-X® structural firefighting gloves keep hands safe, comfortable, and dexterous while fighting fire.

Gloves are equipped with inner liners of 360-degree heat and liquid resistance, as well as extra cut protection, for both maximum protection and peace of mind.

The exterior water-resistant and flame-resistant cow suede provides unsurpassed comfort and dexterity right out of the bag, even after repeated use and washings.

FireArmor® SR-X® gloves are compliant and certified to NFPA 1971:2018 for the ultimate firefighting glove on the market.

Size: 6/XS through 13/4XL

The two-tone modacrylic fabric, together with the reflective strips, provide the wearer with advanced visibility and full protection in hazardous situations.

The enhanced design fulfils the stringent requirements of Arc Flash protection.

Inherent flame resistant qualities will not diminish with washing.

Protection against radiant, convective and contact heat.

Sew on flame resistant industrial wash tape.

40+ UPF rated fabric to block 98% of UV rays.

Color: Yellow/Navy S – 3XL

EN ISO 11612 (A1+A2, B2, C1, F1)
EN ISO 11611 Class 1 (A1+A2)
EN 1149 -5
IEC 61482-2 IEC 61482-1-1 (Elim 6.4 CAL/CM² )
IEC 61482-2 IEC 61482-1-2 APC 1
EN 13034 Type PB [6]
EN ISO 20471 Class 2
ASTM F1959/F1959M-12 (ATPV=8.4 Cal/CM2 (HAF=75.8%))

Conforming to multiple EN standards, these trousers offer ideal protection against exposure to industrial hazards.

The elasticated back waist allows for freedom of movement and ensures the garment sits comfortably.

Inherent flame resistant qualities will not diminish with washing.

Protection against radiant, convective and contact heat.

Triple-stitched seams for extra durability.

Two tier knee pad pockets allowing two positioning options.

Sew on flame resistant industrial wash tape.

Color: Yellow/Navy S – 3XL

EN ISO 11612 (A1+A2, B2, C1, F1)
EN ISO 11611 Class 1 (A1+A2)
EN 1149 -5
IEC 61482-2 IEC 61482-1-1 (Elim 6.4 CAL/CM² )
IEC 61482-2 IEC 61482-1-2 APC 1
EN 13034 Type PB [6]
EN ISO 20471 Class 1
ASTM F1959/F1959M-12 (ATPV=8.4 Cal/CM2 (HAF=75.8%))

 This long sleeve, light weight jacket offers full upper body protection. 

This item can be used in a range of situations where hazard protection is required. 

Must be worn over index 2 or 3 garments to offer full flame resistant protection.

Color: Orange, Yellow

EN ISO 14116 Index 1
EN 1149 -5
EN ISO 20471 Class 3
RIS-3279-TOM ISSUE 1 (ORANGE ONLY)
GO/RT 3279 Issue 8 (orange only) 

Features include 5cm wide silver reflective strips, two around the body and one over each shoulder.

Lightweight and comfortable, this vest is perfect for working in warm temperatures.

Anti-static.

Premium sew on flame resistant reflective tape.

Hook and loop closure for easy access.

Non-magnetic - nickel and ferrous free.

Lightweight and comfortable

Complies with RIS 3279-TOM for rail industry (orange only).

Color: Yellow S/M - 4XL/5XL, Orange S/M - XXL/3XL

EN ISO 14116 Index 1
EN 1149 -5
EN ISO 20471 Class 2
RIS 3279 TOM Issue 2 (Orange Only)

The Hi-Vis Anti-static Bizflame Pro Coverall offers all the benefits of flame resistant fabric with added hi-vis and anti-static protection.

Protection against radiant, convective and contact heat.

Certified protection against molten metal splash.

Stud adjustable cuffs for a secure fit.

Twin-stitched seams for extra durability.

Knee pad pockets to facilitate knee pads (*Knee pads sold separately)

Premium sew on flame resistant reflective tape.

CE-CAT III.

Colors: Yellow/Navy S-4XL

EN ISO 11612 (A1+A2, B1, C1, E3, F1)
EN ISO 11611 Class 1 (A1+A2)
EN 1149 -5
EN ISO 20471 Class 3

The FR75 is a great addition to our Flame Retardant vest collection.

Certified to EN ISO 20471 Class 2 and EN ISO 14116 Index 1, the vest must be worn over Index 2 or 3 garments to offer flame retardant protection.

Premium sew on flame resistant reflective tape.

Hook and loop closure for easy access.

Non-magnetic - nickel and ferrous free.

Lightweight and comfortable.

Generous fit for wearer comfort.

Color: Yellow S/M - 4XL/5XL, Orange S/M - XXL/3XL

EN ISO 14116 Index 1
EN ISO 20471 Class 2
RIS 3279 TOM Issue 2 (Orange Only)

 Uncomplicated design twinned with exceptional protective properties. Offering both high visibility safety and flame retardant protection, the FR73 is an outstanding garment. Certified to EN471 Class 3:2 and EN 533 Index 1, the vest must be worn over Index 2 or 3 garments to offer flame retardant protection.

EN 533 Index 1
EN 471:2003 + A1:2007 Class 3:2 

The two-tone modacrylic fabric, together with the reflective strips, provide the wearer with advanced visibility and full protection in hazardous situations.

The enhanced design fulfils the stringent requirements of Arc Flash protection.

Inherent flame resistant qualities will not diminish with washing.

Protection against radiant, convective and contact heat.

Triple-stitched seams for extra durability.

Action back for extra freedom of movement.

Bio motion tape pattern to improve recognition of human shape at distance.

Sew on flame resistant industrial wash tape.

Two tier knee pad pockets allowing two positioning options.

Color: Yellow/Navy S – 5XL

EN ISO 11612 (A1+A2, B2, C1, F1)
EN ISO 11611 Class 1 (A1+A2)
EN 1149 -5
IEC 61482-2 IEC 61482-1-1 (Elim 6.4 CAL/CM²)
IEC 61482-2 IEC 61482-1-2 APC 1
EN 13034 Type 6
EN ISO 20471 Class 3
ASTM F1959/F1959M-12 (ATPV=8.4 Cal/CM2 (HAF=75.8%))

FR60 is constructed with highly innovative Bizflame Multi fabric.

This comfortable garment offers protection against multiple risks including exposure to heat, fire, chemicals, electrical arcs and welding.

Features include twin-stitched Hi-Vis strips on chest, arms, shoulders and legs, concealed 2-way front brass zip, two concealed front chest pockets with piping detail, concealed side access pockets, hip pockets and rule pocket.

The garment also has patented knee pad pockets designed with an innovative two tier adjustable system.

Protection against radiant, convective and contact heat.

Certified protection against molten metal splash.

Colors: Yellow/Navy S-4XL

EN ISO 11612 (A1+A2, B1, C1, E3, F1)
EN ISO 11611 Class 1 (A1+A2)
EN 1149 -5
IEC 61482-2 IEC 61482-1-1 (Elim 13 CAL/CM² )
IEC 61482-2 IEC 61482-1-2 APC 1
EN 13034 Type 6
EN ISO 20471 Class 3
ASTM F1959/F1959M-12 (ATPV=13.6 Cal/CM2 (HAF=82%))

FR61 is constructed with highly innovative Bizflame Multi fabric.

This comfortable garment offers protection against multiple risks including exposure to heat, fire, chemicals, electrical arcs and welding.

Features include twin-stitched Hi-Vis strips on chest, arms and shoulders, concealed 2-way front brass zip and two concealed front chest pockets with piping detail.

Protection against radiant, convective and contact heat.

Certified protection against molten metal splash.

Triple-stitched seams for extra durability.

Durable, strong and long lasting brass zip.

Sew on flame resistant industrial wash tape.

Colors: Yellow/Navy S-3XL

EN ISO 11612 (A1+A2, B1, C1, E3, F1)
EN ISO 11611 Class 1 (A1+A2)
EN 1149 -5
IEC 61482-2 IEC 61482-1-1 (Elim 13 CAL/CM² )
IEC 61482-2 IEC 61482-1-2 APC 1
EN 13034 Type PB [6]
EN ISO 20471 Class 3
ASTM F1959/F1959M-12 (ATPV = 13.6 CAL/CM2 (HAF = 82%))

FR62 is constructed with highly innovative Bizflame Work HV fabric.

This comfortable garment offers protection against multiple risks including exposure to heat, fire, chemicals, electrical arcs and welding.

Features include twin-stitched Hi-Vis strips on legs, a front brass zip and two flapped front pockets, one flapped back pocket and a lower tool pocket with flap.

Protection against radiant, convective and contact heat.

Certified protection against molten metal splash.

Durable, strong and long lasting brass zip.

Sew on flame resistant industrial wash tape.

Colors: Yellow/Navy S - 3XL

EN ISO 11612 (A1+A2, B1, C1, E3, F1)
EN ISO 11611 Class 1 (A1+A2)
EN 1149 -5
IEC 61482-2 IEC 61482-1-1 (Elim 13 CAL/CM² )
IEC 61482-2 IEC 61482-1-2 APC 1
EN 13034 Type PB [6]
EN ISO 20471 Class 2
ASTM F1959/F1959M-12 (ATPV = 13.6 CAL/CM2 (HAF = 82%))

The FR70 is a fantastic new addition to Portwest's vest collection.

Certified to EN ISO 20471 Class 2 and EN 533 Index 1, the vest must be worn over Index 2 or 3 garments to offer flame retardant protection.

Color: Orange, Yellow S/M – 4XL/5XL

EN 533 INDEX 1
EN 471:2003 + A1:2007 CLASS 2:2

EN ISO 20471 CLASS 2
EN ISO 14116 

Ingot Heatbeater is a mitten aimed at extreme heat handling applications, made from modified glass, with Kevlar felt and an aluminised glass fabric cuff.

It offers protection for the most intense heat applications, and is available in two sizes. (45cm and 66cm).

Heat Resistant: Provides exceptional protection against heat.

Comfort: The Kevlar® felt lining provides the wearer with exceptional comfort.

Range: Available in 45cm (7572) and longer 66cm (7582) length for extra protection to the forearm.

Contact Temperature: 500ºC for 40 seconds.

Size: One Size (45cm)

Ingot Heatbeater is a mitten aimed at extreme heat handling applications, made from modified glass, with Kevlar felt and an aluminised glass fabric cuff.

It offers protection for the most intense heat applications, and is available in two sizes. (45cm and 66cm).

Heat Resistant: Provides exceptional protection against heat.

Comfort: The Kevlar® felt lining provides the wearer with exceptional comfort.

Range: Available in 45cm (7572) and longer 66cm (7582) length for extra protection to the forearm.

Contact Temperature: 500ºC for 40 seconds.

Size: One Size (66cm)

Fall arrest harness resistant to high temperatures, designed for users who work with welding.

It has a dorsal fall arrest ring and two fall arrest rings on the front (A/2).

It also includes height and leg-adjustable straps.

The aramid straps sewn with Kevlar thread are resistant up to 371ºC.

All the metal parts of this harness are made of steel, which ensures excellent durability over time

Regulation: EN 361, EN ISO 15025, ISO 9150

Size: Universal

Weight: 1.4 kg

Usability: 140 kg

Positioning lanyard with adjustable locking buckle.

Work positioning work consists of surrounding a structure with the work positioning lanyard in order to achieve the optimal and comfortable point for working.

It is compulsory to work with a fall arrest system in addition to the work positioning lanyard.

This positioning lanyard is part of the Flame Resistant range, for work at a height and welding environments.

Thanks to the aramid straps sewn with Kevlar thread, they are resistant up to 371ºC.

Regulation: EN 358, EN ISO 15025, ISO 9150

Length: 2 m

Weight: 0.5 kg

Energy absorber with lanyard and a 50 mm aluminium gancho hook designed to withstand falls, reducing impact to less than 6 kN.

This absorber is part of the Flame Resistant range, offering PPE which resists flames, for work at a height and in welding environments.

Lanyard made entirely from aramid and sewn with Kevlar threads, making it resistant up to 371ºC.

They are equipped with an Irucheck NFC chip for efficient equipment management and inspection.

Regulation: EN355, EN ISO 15025, ISO 9150, EN362

Length: 150 cm

Weight: 1 kg

Energy absorber with lanyard and a 50 mm aluminium gancho hook designed to withstand falls, reducing impact to less than 6 kN.

This absorber is part of the Flame Resistant range, offering PPE which resists flames, for work at a height and in welding environments.

Lanyard made entirely from aramid and sewn with Kevlar threads, making it resistant up to 371ºC.

They are equipped with an Irucheck NFC chip for efficient equipment management and inspection.

Regulation: EN355, EN ISO 15025, ISO 9150, EN362

Length: 150 cm

Weight: 1 kg

The FR6 is a robust anchor belt measuring 1.5 m in length.

It is made from aramid and Kevlar and features two integrated D-shaped steel rings.

This type of anchor cable is recommended when there is a risk of sharp edges or work with welding.

Regulation: EN 795B, ISO 9150, EN ISO 15025

Length: 150 cm

Weight: 0.2 kg

Kilonewton: > 22kN

Providing vital protection for the head and neck area this premium quality hood is made of split cowhide leather.

The strong material is suitable for the toughest welding jobs.

Colors: Tan One Size

EN ISO 11611 CLASS 2 A1 

 Premium quality welding apron made of split cowhide leather with stitching made from Para-aramid.

The apron protects the torso and upper legs when welding and is designed to last in the toughest environment.

The adjustable straps and a quick release buckle ensures that the apron is secure and has a perfect fit.

Sizes: 91cm X 58cm

EN ISO 11611 CLASS 2 A1 

Premium quality boot covers made of split cowhide leather.

The strong material protects the feet and lower legs when welding and is designed to last in the toughest environments.

EN ISO 11611 CLASS 2 A1 

This premium quality welding jacket is made from split cowhide leather and stitched with para-aramid thread.

It offers enhanced protection to the torso when welding and is designed to last in the toughest environments.

Color: Tan M-3XL

EN ISO 11611 CLASS 2 A1 

 Premium quality welding sleeves made of split cowhide leather with stitching made from Para-aramid.

Designed to protect the forearm and elbow in the toughest environment.

The elasticated ends ensures maximum protection and a secure fit for welders.

EN ISO 11611 CLASS 2 A1 

This premium quality welding trouser is made from split cowhide leather and stitched with para-aramid thread.

It offers enhanced protection to the wearer when welding and is designed to last in the toughest environments.

Color: Tan M-3XL

EN ISO 11611 CLASS 2 A1 

AM10 and AM11 Approach coats are designed to be used where high heat reflective properties are required. The AM11 is similar in design to the AM10 but is constructed with an additional inner thermal layer increasing the heat resistant properties.

EN ISO 11612 A1,B2,C4,D2,E3,F2

Designed to be worn with the AM15 Lined Approach Trouser, the articulate design includes raglan sleeves and upper back bellows to allow complete freedom of movement. Features include an inside hook & loop closure pocket and elasticated cuffs.

EN ISO 11612 A1,B2,C4,D2,E3,F2

Designed to be worn with the AM14 Lined Approach Jacket, the aluminised trouser provides the wearer with protection from radiant heat and high temperatures. Features include an ergonomically shaped knee, back bib and elasticated adjustable shoulder braces.

EN ISO 11612 A1,B2,C4,D2,E3,F2

MASCOT® Arbon | Trousers with kneepad pockets, multi-protective, class 2

Anti-static, acid-resistant and flame-retardant.

Double and triple stitched seams on leg and crotch.

Waist band formed following the body's anatomy so that it supports in all working positions.

Ergonomically shaped trouser legs are constructed to follow the body's natural movements.

Adjustable kneepad pockets with flap and top access, so dirt doesn't collect.

Colors: Hi-Vis Yellow/Dark Navy (17010)

Certifications:

EN ISO 11612 (A1, A2, B1, C1, E1, F1)

EN ISO 11611 - class 1 (A1, A2)

EN 1149-3

EN 1149-5

IEC 61482-2 class 1 (tested in accordance with EN 61482-1-2)

EN 13034 (Type 6)

EN ISO 20471 - class 2.

MASCOT® MULTISAFE Arosa | Trousers with kneepad pockets, dirt repellent, multi-protective

Anti-static, acid-resistant and flame-retardant.

Dirt repellent.

Durable triple stitched seams that extend the product life.

Ergonomically shaped trouser legs are constructed to follow the body's natural movements.

Adjustable kneepad pockets with flap and top access, so dirt doesn't collect.

Colors: Dark Navy (010)